- Full Description
- Features & Specification
- Important Notices
IP44 & IP67 panel mounted sockets available in 3, 4 & 5 pole and with termination choices of screw or screwless.
Panel mounted sockets have hinged dust cover and are wired from the rear.
Mennekes product is well known all over the world – and complies with the relevant national and international standards.
More than half of our products are destined for international markets. This is why Mennekes also has a global presence, with subsidiaries and agencies in more than 90 countries.
Our plugs and sockets are tested by independent test authorities, e.g. the VDE Testing and Certification institute or other national Testing and Certification institutes.
They then serve as the basis for approvals in other countries, such as those whose national test marks are shown below.
(For plugs and sockets for the USA and Canada please refer to the information in separate USA catalogue.)
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, Screwless TwinCONTACT
- Wire Gauge Max: 70.00mm²
- Max. Voltage: 110-500V
- Max. Current: 16-125A
- Ingress Protection: IP44, IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
IP44 & IP67 panel mounted sockets available in 3, 4 & 5 pole and with termination choices of screw or screwless.
Panel mounted sockets have hinged dust cover and are wired from the rear.
Mennekes product is well known all over the world – and complies with the relevant national and international standards.
More than half of our products are destined for international markets. This is why Mennekes also has a global presence, with subsidiaries and agencies in more than 90 countries.
Our plugs and sockets are tested by independent test authorities, e.g. the VDE Testing and Certification institute or other national Testing and Certification institutes.
They then serve as the basis for approvals in other countries, such as those whose national test marks are shown below.
(For plugs and sockets for the USA and Canada please refer to the information in separate USA catalogue.)
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, Screwless TwinCONTACT
- Wire Gauge Max: 70.00mm²
- Max. Voltage: 110-500V
- Max. Current: 16-125A
- Ingress Protection: IP44, IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
