- Full Description
- Features & Specification
- Important Notices
The VGE1 1/3 bayonet coupling series was designed for railway equipment manufacturers, subcontractors, signaling and infrastructure companies. Robust and ruggedized, VGE1 connectors are suited for 500 mating and unmating cycles and are derived from MIL-DTL-5015 and VG95234 standards.
With only a 1/3 twist of the bayonet, connectors are mated with an audible click and tactile feel to confirm proper mating. This mating system eliminates uncertain connection and reduces time and labor during installation.
The VGE1 connectors are resistant to salt spray as well as high vibrations and adapted for outdoor applications such as rolling stock or infrastructure equipment.
Available with electrical contacts, quadrax and fiber optic technologies in the same shell design; you can customize VGE1 connectors to your application needs.
These solutions are qualified according to international railway standards: EN50467, EN45545, NFPA 130, RoHS and REACH.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 4-60
- Locking Mechanism: Bayonet, Screw
- Contact Termination: Crimp, Dip-Solder
- Wire Gauge Max: 6.00mm²
- Cable Diameter Range: 4-35mm
- Connector Types: Cable to Panel
- Max. Voltage: UL, CSA, IEC Ratings Available on Request
- Max. Current: UL, CSA, IEC Ratings Available on Request
- Ingress Protection Max: IP67
- Salt Spray Resistance: 500 hours
- Moulded Cable Option: No
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
The VGE1 1/3 bayonet coupling series was designed for railway equipment manufacturers, subcontractors, signaling and infrastructure companies. Robust and ruggedized, VGE1 connectors are suited for 500 mating and unmating cycles and are derived from MIL-DTL-5015 and VG95234 standards.
With only a 1/3 twist of the bayonet, connectors are mated with an audible click and tactile feel to confirm proper mating. This mating system eliminates uncertain connection and reduces time and labor during installation.
The VGE1 connectors are resistant to salt spray as well as high vibrations and adapted for outdoor applications such as rolling stock or infrastructure equipment.
Available with electrical contacts, quadrax and fiber optic technologies in the same shell design; you can customize VGE1 connectors to your application needs.
These solutions are qualified according to international railway standards: EN50467, EN45545, NFPA 130, RoHS and REACH.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 4-60
- Locking Mechanism: Bayonet, Screw
- Contact Termination: Crimp, Dip-Solder
- Wire Gauge Max: 6.00mm²
- Cable Diameter Range: 4-35mm
- Connector Types: Cable to Panel
- Max. Voltage: UL, CSA, IEC Ratings Available on Request
- Max. Current: UL, CSA, IEC Ratings Available on Request
- Ingress Protection Max: IP67
- Salt Spray Resistance: 500 hours
- Moulded Cable Option: No
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
VGE10078A
Crimp Tool Locator
VGE10077A
Crimp Tool Locator
RX20D44
Contact Extraction Tool
RX2025GE1
Contact Extraction Tool
MH86164G
Crimp Tool Locator
MH860
Crimp Tool for Souriau 1.6mm Machined Contacts
M317
Crimp Tool for Souriau 2.4mm & 3.6mm Contacts
M22520/1-01
Crimp Tool Frame
RM24W3K
1mm Crimp Pin Contact, Machined Construction, Gold Plating, 0.12-0.25mm²
RM20W3K
1mm Crimp Pin Contact, Machined Construction, Gold Plating, 0.32-0.50mm²
RM20M12K
1.6mm Crimp Pin Contact, Machined Construction, Gold Plating, 0.32-0.50mm²
RM18W3K
1mm Crimp Pin Contact, Machined Construction, Gold Plating, 0.50-0.82mm²
RM16M23K
1.6mm Crimp Pin Contact, Machined Construction, Gold Plating, 0.50-1.50mm²
RM14M30K
1.6mm Crimp Pin Contact, Machined Construction, Gold Plating, 1.50-2.50mm²
RC24W3K
1mm Crimp Socket Contact, Machined Construction, Gold Plating, 0.12-0.25mm²
RC20W3K
1mm Crimp Socket Contact, Machined Construction, Gold Plating, 0.32-0.50mm²
RC20M12K
1.6mm Crimp Socket Contact, Machined Construction, Gold Plating, 0.32-0.50mm²
RC18W3K
1mm Crimp Socket Contact, Machined Construction, Gold Plating, 0.50-0.82mm²
RC16M23K
1.6mm Crimp Socket Contact, Machined Construction, Gold Plating, 0.50-1.50mm²
RC14M30K
1.6mm Crimp Socket Contact, Machined Construction, Gold Plating, 1.50-2.50mm²
82913607A
3.6mm Crimp Pin Contact, Machined Construction, Silver Plating, 6.00mm²
82913606A
3.6mm Crimp Socket Contact, Machined Construction, Silver Plating, 6.00mm²
82913605A
3.6mm Crimp Pin Contact, Machined Construction, Silver Plating, 4.00mm²
82913604A
3.6mm Crimp Socket Contact, Machined Construction, Silver Plating, 4.00mm²
