- Full Description
- Features & Specification
- Important Notices
Radiall TNC is a range of miniature RF coaxial connectors and is the threaded equivalent of the hugely popular BNC bayonet locking system.
The series is available in 50Ω, 75Ω and 18GHz variants.
General Characteristics
- Screw-on equivalent to BNC bayonet series
- Good RF performance
- Suitable for high power levels
- Long life and high strength
- 3 ranges:
- Standard TNC series (50 and 75Ω fully intermateable)
- Commercial TNC series (50 and 75Ω)
- 18 GHz TNC series (50Ω)
Applicable Standards
- MIL-C-39012 / MIL STD 348A/313
- IEC 60169-17
- CECC 22200
Applications
- Avionics
- Aeronautics
- Countermeasures
- Telecommunications
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- Prefix: R143, R144
- Size: Standard
- Coupling System: Screw-on
- Min. Mating Cycles: 100/500
- Main Cable Types: RG316, RG174, RG58, RG59, RG213, RG214, Semi-rigid & Conformable
- Termination: Crimp, Clamp, Solder
- Impedance: 50, 75 ohms
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
Radiall TNC is a range of miniature RF coaxial connectors and is the threaded equivalent of the hugely popular BNC bayonet locking system.
The series is available in 50Ω, 75Ω and 18GHz variants.
General Characteristics
- Screw-on equivalent to BNC bayonet series
- Good RF performance
- Suitable for high power levels
- Long life and high strength
- 3 ranges:
- Standard TNC series (50 and 75Ω fully intermateable)
- Commercial TNC series (50 and 75Ω)
- 18 GHz TNC series (50Ω)
Applicable Standards
- MIL-C-39012 / MIL STD 348A/313
- IEC 60169-17
- CECC 22200
Applications
- Avionics
- Aeronautics
- Countermeasures
- Telecommunications
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- Prefix: R143, R144
- Size: Standard
- Coupling System: Screw-on
- Min. Mating Cycles: 100/500
- Main Cable Types: RG316, RG174, RG58, RG59, RG213, RG214, Semi-rigid & Conformable
- Termination: Crimp, Clamp, Solder
- Impedance: 50, 75 ohms
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
