- Full Description
- Features & Specification
- Important Notices
Available in 3, 4 and 5 pole configurations, Mennekes IP44 cable plugs allow for 16-63A and 110-500V.
The cable shells come in a range of colours which demonstrate the working voltage that the system they are connected to is running on. These colours are green, black, blue, red and yellow.
The Mennekes brand is well known worldwide and has become a benchmark for quality and reliable product. The company has subsidiaries and agents in more than 90 countries and complies with all of the necessary national and international standards.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, IDC
- Wire Gauge Max: 16.00mm²
- Cable Diameter Max: 36mm
- Max. Voltage: 110-500V
- Max. Current: 16-63A
- Ingress Protection: IP44
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
Available in 3, 4 and 5 pole configurations, Mennekes IP44 cable plugs allow for 16-63A and 110-500V.
The cable shells come in a range of colours which demonstrate the working voltage that the system they are connected to is running on. These colours are green, black, blue, red and yellow.
The Mennekes brand is well known worldwide and has become a benchmark for quality and reliable product. The company has subsidiaries and agents in more than 90 countries and complies with all of the necessary national and international standards.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, IDC
- Wire Gauge Max: 16.00mm²
- Cable Diameter Max: 36mm
- Max. Voltage: 110-500V
- Max. Current: 16-63A
- Ingress Protection: IP44
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
