- Full Description
- Features & Specification
- Important Notices
Mennekes products are highly regarded for their quality – and its IP67 cable connectors are certainly no different. They are available in versions allowing for 16 to 125A and 110 to 500V, and also come in 3, 4 and 5 pole variants.
The shells are available in a range of colours, including:
- Blue
- Black
- Red
- Yellow
- Green
These colours demonstrate working voltage. The products, as with all products from Mennekes, meet all relevant national and international standards.
The Mennekes name is known throughout the world, with a high proportion of its products distributed through international markets.
Quality of product is assured thanks to rigorous testing by independent test authorities, including the VDE Testing and Certification Institute.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, IDC
- Wire Gauge Max: 50.00mm²
- Cable Diameter Max: 49mm
- Max. Voltage: 110-500V
- Max. Current: 16-125A
- Ingress Protection: IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
Mennekes products are highly regarded for their quality – and its IP67 cable connectors are certainly no different. They are available in versions allowing for 16 to 125A and 110 to 500V, and also come in 3, 4 and 5 pole variants.
The shells are available in a range of colours, including:
- Blue
- Black
- Red
- Yellow
- Green
These colours demonstrate working voltage. The products, as with all products from Mennekes, meet all relevant national and international standards.
The Mennekes name is known throughout the world, with a high proportion of its products distributed through international markets.
Quality of product is assured thanks to rigorous testing by independent test authorities, including the VDE Testing and Certification Institute.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, IDC
- Wire Gauge Max: 50.00mm²
- Cable Diameter Max: 49mm
- Max. Voltage: 110-500V
- Max. Current: 16-125A
- Ingress Protection: IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
