- Full Description
- Features & Specification
- Important Notices
IP44 cable connectors from Mennekes are available in 3, 4 & 5 pole variants.
The connectors working voltage is represented by the shell colour which is either red, blue, yellow, green or black.
Mennekes connectors allow for 16-36A and 110-500V.
Mennekes products comply with the relevant national and international standards. Connectors are tested and approved by an array of testing and certification institutes such as VDE.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, IDC
- Wire Gauge Max: 16.00mm²
- Cable Diameter Max: 36mm
- Max. Voltage: 110-500V
- Max. Current: 16-63A
- Ingress Protection: IP44
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
IP44 cable connectors from Mennekes are available in 3, 4 & 5 pole variants.
The connectors working voltage is represented by the shell colour which is either red, blue, yellow, green or black.
Mennekes connectors allow for 16-36A and 110-500V.
Mennekes products comply with the relevant national and international standards. Connectors are tested and approved by an array of testing and certification institutes such as VDE.
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Push-fit, Locking Ring
- Termination: Screw, IDC
- Wire Gauge Max: 16.00mm²
- Cable Diameter Max: 36mm
- Max. Voltage: 110-500V
- Max. Current: 16-63A
- Ingress Protection: IP44
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
