- Full Description
- Features & Specification
- Important Notices
Lumberg Automations M23 series is a range of heavy duty waterproof multipole connectors for industrial applications.
The M23 x 1mm interface is an industry standard and often seen across many industrial applications where power is required in demanding environments.
The M23 series offers pin counts of 6, 9, 12 and 19 with various wire gauges and rated current with a top end of 2.5mm² and 20A.
The rugged cable connectors are available in straight or angled orientation and as a field attachable option or with moulded cable. Connectors can be mated in-line for a cable to cable/extension setup or with the mating panel connector (not offered by Lumberg Automation).
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 6-19
- Locking Mechanism: Screw
- Termination: Solder, Screw
- Wire Gauge Max: 2.50mm²
- Cable Diameter Range: 6-14.5mm
- Max. Voltage: 150-300V
- Max. Current: 8-20A
- Ingress Protection: IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
Lumberg Automations M23 series is a range of heavy duty waterproof multipole connectors for industrial applications.
The M23 x 1mm interface is an industry standard and often seen across many industrial applications where power is required in demanding environments.
The M23 series offers pin counts of 6, 9, 12 and 19 with various wire gauges and rated current with a top end of 2.5mm² and 20A.
The rugged cable connectors are available in straight or angled orientation and as a field attachable option or with moulded cable. Connectors can be mated in-line for a cable to cable/extension setup or with the mating panel connector (not offered by Lumberg Automation).
For a more detailed description of this connector series please see the manufacturer’s brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 6-19
- Locking Mechanism: Screw
- Termination: Solder, Screw
- Wire Gauge Max: 2.50mm²
- Cable Diameter Range: 6-14.5mm
- Max. Voltage: 150-300V
- Max. Current: 8-20A
- Ingress Protection: IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
