- Full Description
- Features & Specification
- Important Notices
Standardised circular connectors with an M8x1 thread are widespread in the installation of machines and systems.
HARTING offers a portfolio of field-assembly M8 connectors which are attuned to meet all relevant automation requirements.
The HARTING range of M8 connectors comprises field wireable cable plugs, ready-to-use patch cables and corresponding accessories.
HARAX® quick connection is the termination method for HARTING M8 connectors and this IDC technology does not require the use of special tools.
HARTING M8 connectors are avilable in 3 & 4 way, can cater for a cable range of 1.9-5.1mm and have a current carrying capacity of 2-4A.
HARTING’s comprehensive and user-friendly circular connector range enables cost-effective and quick realisation of all wiring and communication tasks in automation projects.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form above or simply call us on 01744 815001.
- No. of Contacts: 3 & 4
- Locking Mechanism: Screw
- Termination: IDC
- Wire Gauge Max: 0.34mm²
- Cable Diameter Range: 1.9 – 5.1mm
- Max. Voltage: 32-60V
- Max. Current: 2-4A
- Ingress Protection: IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
Standardised circular connectors with an M8x1 thread are widespread in the installation of machines and systems.
HARTING offers a portfolio of field-assembly M8 connectors which are attuned to meet all relevant automation requirements.
The HARTING range of M8 connectors comprises field wireable cable plugs, ready-to-use patch cables and corresponding accessories.
HARAX® quick connection is the termination method for HARTING M8 connectors and this IDC technology does not require the use of special tools.
HARTING M8 connectors are avilable in 3 & 4 way, can cater for a cable range of 1.9-5.1mm and have a current carrying capacity of 2-4A.
HARTING’s comprehensive and user-friendly circular connector range enables cost-effective and quick realisation of all wiring and communication tasks in automation projects.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form above or simply call us on 01744 815001.
- No. of Contacts: 3 & 4
- Locking Mechanism: Screw
- Termination: IDC
- Wire Gauge Max: 0.34mm²
- Cable Diameter Range: 1.9 – 5.1mm
- Max. Voltage: 32-60V
- Max. Current: 2-4A
- Ingress Protection: IP67
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
