- Full Description
- Features & Specification
- Important Notices
CONEC D-subminiature (d-sub) connector dimensions conform to IEC 60807-2 (formerly DIN 41652) or MIL-C-24308. Additionally, the product line is UL (E202784), CSA (LR 115000-1) and VDE (40000440) approved.
These connectors are deliverable in five standardised housing sizes with pin counts of 9, 15, 25, 37 and 50 in the standard format and 15, 26, 44, 62 and 78 way options in a high density config.
CONEC d-subs boast a trapezoidal-shaped shell that performs a number of essential functions, including electrical shielding, mechanical protection and polarisation.
Notably, these types of connector conform with, and are interchangeable with, all other conforming d-sub connectors on the market.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001
- No. of Contacts: 9-78
- Locking Mechanism: Hood with Screws
- Termination: Solder, Dip-Solder, Press-Fit, Wire Wrap, IDC, Crimp
- Wire Gauge Max: 0.52mm²
- Max. Voltage: Available on Request
- Max. Current: 2.5-7A
- Ingress Protection: IP20
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
CONEC D-subminiature (d-sub) connector dimensions conform to IEC 60807-2 (formerly DIN 41652) or MIL-C-24308. Additionally, the product line is UL (E202784), CSA (LR 115000-1) and VDE (40000440) approved.
These connectors are deliverable in five standardised housing sizes with pin counts of 9, 15, 25, 37 and 50 in the standard format and 15, 26, 44, 62 and 78 way options in a high density config.
CONEC d-subs boast a trapezoidal-shaped shell that performs a number of essential functions, including electrical shielding, mechanical protection and polarisation.
Notably, these types of connector conform with, and are interchangeable with, all other conforming d-sub connectors on the market.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001
- No. of Contacts: 9-78
- Locking Mechanism: Hood with Screws
- Termination: Solder, Dip-Solder, Press-Fit, Wire Wrap, IDC, Crimp
- Wire Gauge Max: 0.52mm²
- Max. Voltage: Available on Request
- Max. Current: 2.5-7A
- Ingress Protection: IP20
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
