- Full Description
- Features & Specification
- Important Notices
The binder snap-in IP40 series is a small range of subminiature connectors suitable for low-cost applications that require a simple locking mechanism.
The series offers field attachable cable versions with or without strain relief in 3, 4 and 5 way with solder cup termination or as a single ended overmould in 2 & 5 metres as standard.
Panel mount receptacles come with termination options of both solder and dip solder for PCB use.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Snap-in
- Contact Termination: Solder, Dip-Solder
- Wire Gauge Max: 0.25mm²
- Cable Diameter Range: 3.5-5mm
- Connector Types: Cable to Panel, Cable to Cable
- Max. Voltage: 60V
- Max. Current: 3A
- Ingress Protection Max: IP40
- Pre-wired Options: Yes
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
The binder snap-in IP40 series is a small range of subminiature connectors suitable for low-cost applications that require a simple locking mechanism.
The series offers field attachable cable versions with or without strain relief in 3, 4 and 5 way with solder cup termination or as a single ended overmould in 2 & 5 metres as standard.
Panel mount receptacles come with termination options of both solder and dip solder for PCB use.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001.
- No. of Contacts: 3-5
- Locking Mechanism: Snap-in
- Contact Termination: Solder, Dip-Solder
- Wire Gauge Max: 0.25mm²
- Cable Diameter Range: 3.5-5mm
- Connector Types: Cable to Panel, Cable to Cable
- Max. Voltage: 60V
- Max. Current: 3A
- Ingress Protection Max: IP40
- Pre-wired Options: Yes
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
