- Full Description
- Features & Specification
- Important Notices
The RD30 Power series of connectors are a range of robust circulars with screw locking mating mechanism.
The RD30 is one of the largest connectors in the Binder portfolio and measures 40mm across the coupling nut and has a 100mm + backshell and gland system.
This series can cater for up to 18mm cable OD and has pin counts of 5 (4+PE), 13 (12+PE) and 24.
The system allows for wire gauges of up to 2.5mm² with a rated current of 20A which is a huge increase when compared to some of the smaller setups in the portfolio.
Cable connectors are available in both straight and angled with receptacles being the square flanged variety.
The 5 way layout is terminated by means of screw whereas the 13 and 24 way layouts offer solder cup termination.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001
- No. of Contacts: 5-24
- Locking Mechanism: Screw
- Contact Termination: Solder, Screw
- Wire Gauge Max: 2.50mm²
- Cable Diameter Range: 10-18mm
- Connector Types: Cable to Panel, Cable to Cable
- Max. Voltage: 125-400V
- Max. Current: 3-20A
- Ingress Protection Max: IP65
- Pre-wired Options: No
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
The RD30 Power series of connectors are a range of robust circulars with screw locking mating mechanism.
The RD30 is one of the largest connectors in the Binder portfolio and measures 40mm across the coupling nut and has a 100mm + backshell and gland system.
This series can cater for up to 18mm cable OD and has pin counts of 5 (4+PE), 13 (12+PE) and 24.
The system allows for wire gauges of up to 2.5mm² with a rated current of 20A which is a huge increase when compared to some of the smaller setups in the portfolio.
Cable connectors are available in both straight and angled with receptacles being the square flanged variety.
The 5 way layout is terminated by means of screw whereas the 13 and 24 way layouts offer solder cup termination.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001
- No. of Contacts: 5-24
- Locking Mechanism: Screw
- Contact Termination: Solder, Screw
- Wire Gauge Max: 2.50mm²
- Cable Diameter Range: 10-18mm
- Connector Types: Cable to Panel, Cable to Cable
- Max. Voltage: 125-400V
- Max. Current: 3-20A
- Ingress Protection Max: IP65
- Pre-wired Options: No
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
