- Full Description
- Features & Specification
- Important Notices
The binder push-pull series is a compact range of circular connectors designed for tight spaces and applications which require quick release but one that wouldn’t disconnect if snagged unlike the snap-in varieties.
binder’s push-pull subminiature is one of a few versions of push-pull connection seen in the portfolio and offers both IP40 & IP67 environmental protection.
The system offers 3 to 8 pole options both in field attachable cable plug and panel receptacle with solder cup termination.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001
- No. of Contacts: 3-8
- Locking Mechanism: Push-Pull
- Contact Termination: Solder, Dip-Solder
- Wire Gauge Max: 0.25mm²
- Cable Diameter Range: 3.5-5mm
- Connector Types: Cable to Panel
- Max. Voltage: 125V
- Max. Current: 1-4A
- Ingress Protection Max: IP40, IP67
- Pre-wired Options: No
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
The binder push-pull series is a compact range of circular connectors designed for tight spaces and applications which require quick release but one that wouldn’t disconnect if snagged unlike the snap-in varieties.
binder’s push-pull subminiature is one of a few versions of push-pull connection seen in the portfolio and offers both IP40 & IP67 environmental protection.
The system offers 3 to 8 pole options both in field attachable cable plug and panel receptacle with solder cup termination.
For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.
For a personalised quotation on any of the part numbers seen in this range please complete the ‘Quick Quote’ form or simply call us on 01744 815001
- No. of Contacts: 3-8
- Locking Mechanism: Push-Pull
- Contact Termination: Solder, Dip-Solder
- Wire Gauge Max: 0.25mm²
- Cable Diameter Range: 3.5-5mm
- Connector Types: Cable to Panel
- Max. Voltage: 125V
- Max. Current: 1-4A
- Ingress Protection Max: IP40, IP67
- Pre-wired Options: No
Electrical Notes
See literature for derating curves
Safety Notes
Connectors must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury
Ingress Protection Notes
Rating only guaranteed when locked to the proper mating half from the same manufacturer unless stated otherwise
Additional accessories may also be required to maintain IP rating in some instances
