Conec D-Sub High Density

Rectangular flanged connector with d-shaped mating face.

The d-subminiature (d-sub) standard connector was introduced in the 1950’s, recognisable by its rectangular flange and d-shaped face which ensures correct orientation. High density layouts were introduced at later dates and share the same shell sizes but with higher pin counts.

High density d-subs are available in 15, 26, 44, 62 and 78 way variants.

Characteristics

  • IP20
Full Description

Conec® D-subminiature (d-sub) connector dimensions conform to IEC 60807-2 (formerly DIN 41652) or MIL-C-24308.

These cable/device connectors each consist of a plug/jack mating pair which meets IEC recommendation 48 B.

High density layouts are available in 15, 26, 44, 62 and 78 way.

Common environments for d-sub connectors include industrial control systems, computer technology and in telecommunication equipment.

The product line is UL (E202784), CSA (LR 115000-1) and VDE (40000440) approved.

The trapezoidal shaped shell is used for mechanical protection, electrical shielding and polarization.

Conec high-density d-subs are compatible and interchangeable with all conforming d-sub connectors available from other manufacturers.

For a more detailed description of this connector series please see the manufacturers brochure which is available to download above.

For a personalised quotation on any of the part numbers seen in this range please complete the 'Quick Quote' form or simply call us on 01744 815001.

Features & Specification
  • No. of Contacts 15-78
  • Locking Mechanism Hood with Screws
  • Termination Solder Cup, Dip Solder, Press-Fit, Crimp
  • Wire Gauge Max. 22 AWG
  • Voltage Available on Request
  • Current 2.5-3A
  • Ingress Protection IP20

If you need expert help with any of our products...   Email Us   call us on 01744 815 001